Technology

NASA Scientists Fix Hubble Telescope By Turning It Off And On Again

No featured image available

NASA fixed the Hubble Space Telescope by restarting and jiggling it around on Oct. 19 after a gyroscope failure forced the multibillion dollar telescope into safe mode on Oct. 5, a press release revealed Monday.

The NASA statement includes a technical description of the commands scientists gave the satellite in an attempt to correct a malfunction that caused its gyroscope, or “gyro,” as NASA calls it, to give incorrect readings. The solution, according to the IT writers at Gizmodo, equated roughly to “wiggle some things around” and “turn it off and on again.”

The first thing NASA tried was to restart the telescope’s navigational gyros.

“This procedure turned the gyro off for one second, and then restarted it before the wheel spun down. The intention was to clear any faults that may have occurred during startup on Oct. 6, after the gyro had been off for more than 7.5 years. However, the resulting data showed no improvement in the gyro’s performance,” NASA’s statement said.

The second set of commands scientists gave to Hubble involved jostling the satellite in orbit to clear away debris that might be affecting the gyro.

“On Oct. 18, the Hubble operations team commanded a series of spacecraft maneuvers, or turns, in opposite directions to attempt to clear any blockage that may have caused the float to be off-center and produce the exceedingly high rates. During each maneuver, the gyro was switched from high mode to low mode to dislodge any blockage that may have accumulated around the float,” NASA continued.

The NASA team commanded the telescope to produce similar movements the following day, “which appear to have cleared the issue” by their report.

The gyroscopes NASA uses to measure small movements in the Hubble are delicate systems. Within the gyro is a wheel spinning at 320 revolutions per second while suspended in a thick liquid and powered by minuscule floating wires.

These machines work hard, wear out, and have expiration dates when they will have to be replaced by one of Hubble’s standby gyros. One of these mechanisms failed after lasting six months beyond its expiration, but the last of Hubble’s standby gyros failed to come online properly when activated on Oct. 6.

The orbital telescope, which has cumulatively cost taxpayers over $10 billion, has required mid-flight repairs before. Two of Hubble’s four maned multimillion dollar service missions have revolved around replacing and maintaining a number of the six gyros housed within the observation satellite. This fix was not nearly so costly or dangerous.

Follow Gavin on Twitter

All content created by the Daily Caller News Foundation, an independent and nonpartisan newswire service, is available without charge to any legitimate news publisher that can provide a large audience. All republished articles must include our logo, our reporter’s byline and their DCNF affiliation. For any questions about our guidelines or partnering with us, please contact [email protected].